{"id":2607,"date":"2024-06-09T02:13:00","date_gmt":"2024-06-09T02:13:00","guid":{"rendered":"https:\/\/www.jammersignal.com\/?p=2607"},"modified":"2024-06-04T09:00:42","modified_gmt":"2024-06-04T09:00:42","slug":"use-different-materials-to-design-jammers","status":"publish","type":"post","link":"https:\/\/www.jammersignal.com\/de\/use-different-materials-to-design-jammers\/","title":{"rendered":"Konstrukteure verwenden verschiedene Materialien f\u00fcr St\u00f6rsender"},"content":{"rendered":"

Die Ausfuhr chinesischer Elektronikprodukte wird h\u00e4ufig aufgrund von Problemen mit der elektromagnetischen Vertr\u00e4glichkeit (EMV) eingeschr\u00e4nkt. Dieser Artikel befasst sich mit EMI-Entst\u00f6rungsmethoden f\u00fcr Produktentwickler und Quellen elektromagnetischer St\u00f6rungen (EMI).<\/p>\n\n\n\n

EMV bezieht sich auf die F\u00e4higkeit eines Ger\u00e4ts, Apparats oder Systems, in der vorgesehenen Umgebung zu funktionieren, ohne andere Ger\u00e4te erheblich zu st\u00f6ren (IEEE C63.12 1987). Obwohl die EMV-Leistung f\u00fcr drahtlose Sende- und Empfangsger\u00e4te durch die Verwendung diskontinuierlicher Teile des Spektrums erreicht werden kann, ist die EMV in einigen F\u00e4llen, wie z. B. bei Interferenzen zwischen St\u00f6rsendern f\u00fcr Handysignale und medizinischen Ger\u00e4ten, nicht ausreichend.<\/p>\n\n\n\n

W\u00e4hrend des Betriebs elektrischer und elektronischer Ger\u00e4te \u00e4ndern sich Spannung und Stromst\u00e4rke intermittierend oder kontinuierlich, manchmal auch schnell. Dadurch wird elektromagnetische Energie verschiedener Frequenzen oder B\u00e4nder erzeugt, die von den entsprechenden Schaltkreisen in die Umgebung abgestrahlt wird.<\/p>\n\n\n\n

\"Weltneuheit<\/a><\/figure>\n\n\n\n

EMI kann auf zwei Arten in einen Schaltkreis eindringen oder ihn verlassen: durch Strahlung und durch Leitung. Abgestrahlte EMI tritt durch L\u00fccken, Schlitze, \u00d6ffnungen oder andere Zwischenr\u00e4ume im Geh\u00e4use des Ger\u00e4ts aus. Leitungsgebundene EMI entsteht, wenn eine Signalleitung das Geh\u00e4use verl\u00e4sst und sich mit Stromleitungen, anderen Signalleitungen oder Steuerleitungen verbindet. Die freie Strahlung dieser Leitungen verursacht Interferenzen, die jedoch in einem anderen Frequenzband liegen als die von der Signalleitung ausgehenden St\u00f6rungen. St\u00f6rsender<\/a>.<\/p>\n\n\n\n

Eine wirksame EMI-Unterdr\u00fcckung wird durch eine Kombination aus der Abschirmung des Ger\u00e4tegeh\u00e4uses und der Verwendung von Steckplatzabschirmungen erreicht. In den meisten F\u00e4llen helfen die folgenden Grunds\u00e4tze bei der EMI-Abschirmung: Reduzierung der St\u00f6rquellen, Verwendung von Abschirmung, Filterung oder Erdung zur Isolierung und Verbesserung der Immunit\u00e4t von Schaltkreisen gegen\u00fcber Rauschen und EMI sowie Gew\u00e4hrleistung einer geringen Empfindlichkeit empfindlicher Schaltkreise gegen\u00fcber St\u00f6rungen. Diese Ziele sollten von den Schaltungsentwicklern priorisiert und schon fr\u00fch in der Entwurfsphase ber\u00fccksichtigt werden. Die beliebtesten und n\u00fctzlichsten St\u00f6rsender f\u00fcr Handys<\/a>.<\/p>\n\n\n\n

\"Weltneuheit<\/figure>\n\n\n\n

Die Konstrukteure haben festgestellt, dass die Verwendung von Abschirmungsmaterialien die EMI sehr wirksam reduziert. Heutzutage wird eine Vielzahl von Abschirmungsmaterialien verwendet, darunter Metalldosen, d\u00fcnne Bleche, Aluminiumfolienb\u00e4nder und Beschichtungen, die auf Gewebe oder leitf\u00e4hige B\u00e4nder aufgetragen werden (z. B. leitf\u00e4hige Farbe und Zinkspray). Sowohl Metall- als auch Kunststoffbeschichtungen k\u00f6nnen leitf\u00e4hige Schichten aufweisen. Sobald der Konstrukteur das Geh\u00e4usematerial bestimmt hat, ist es an der Zeit, die Dichtungen auszuw\u00e4hlen.<\/p>","protected":false},"excerpt":{"rendered":"

Die Ausfuhr chinesischer Elektronikprodukte wird h\u00e4ufig aufgrund von Problemen mit der elektromagnetischen Vertr\u00e4glichkeit (EMV) eingeschr\u00e4nkt. Dieser Artikel befasst sich mit EMI-Entst\u00f6rungsmethoden f\u00fcr Produktentwickler und Quellen elektromagnetischer St\u00f6rungen (EMI). EMV bezieht sich auf die F\u00e4higkeit eines Ger\u00e4ts, einer Anlage oder eines Systems, in der vorgesehenen Umgebung zu funktionieren, ohne andere Ger\u00e4te erheblich elektromagnetisch zu st\u00f6ren [...]<\/p>","protected":false},"author":1,"featured_media":1682,"comment_status":"open","ping_status":"closed","sticky":false,"template":"","format":"standard","meta":{"site-sidebar-layout":"default","site-content-layout":"","ast-site-content-layout":"default","site-content-style":"default","site-sidebar-style":"default","ast-global-header-display":"","ast-banner-title-visibility":"","ast-main-header-display":"","ast-hfb-above-header-display":"","ast-hfb-below-header-display":"","ast-hfb-mobile-header-display":"","site-post-title":"","ast-breadcrumbs-content":"","ast-featured-img":"disabled","footer-sml-layout":"","ast-disable-related-posts":"","theme-transparent-header-meta":"","adv-header-id-meta":"","stick-header-meta":"","header-above-stick-meta":"","header-main-stick-meta":"","header-below-stick-meta":"","astra-migrate-meta-layouts":"set","ast-page-background-enabled":"default","ast-page-background-meta":{"desktop":{"background-color":"var(--ast-global-color-5)","background-image":"","background-repeat":"repeat","background-position":"center center","background-size":"auto","background-attachment":"scroll","background-type":"","background-media":"","overlay-type":"","overlay-color":"","overlay-opacity":"","overlay-gradient":""},"tablet":{"background-color":"","background-image":"","background-repeat":"repeat","background-position":"center center","background-size":"auto","background-attachment":"scroll","background-type":"","background-media":"","overlay-type":"","overlay-color":"","overlay-opacity":"","overlay-gradient":""},"mobile":{"background-color":"","background-image":"","background-repeat":"repeat","background-position":"center center","background-size":"auto","background-attachment":"scroll","background-type":"","background-media":"","overlay-type":"","overlay-color":"","overlay-opacity":"","overlay-gradient":""}},"ast-content-background-meta":{"desktop":{"background-color":"var(--ast-global-color-4)","background-image":"","background-repeat":"repeat","background-position":"center center","background-size":"auto","background-attachment":"scroll","background-type":"","background-media":"","overlay-type":"","overlay-color":"","overlay-opacity":"","overlay-gradient":""},"tablet":{"background-color":"var(--ast-global-color-4)","background-image":"","background-repeat":"repeat","background-position":"center center","background-size":"auto","background-attachment":"scroll","background-type":"","background-media":"","overlay-type":"","overlay-color":"","overlay-opacity":"","overlay-gradient":""},"mobile":{"background-color":"var(--ast-global-color-4)","background-image":"","background-repeat":"repeat","background-position":"center center","background-size":"auto","background-attachment":"scroll","background-type":"","background-media":"","overlay-type":"","overlay-color":"","overlay-opacity":"","overlay-gradient":""}},"footnotes":""},"categories":[99],"tags":[],"class_list":["post-2607","post","type-post","status-publish","format-standard","has-post-thumbnail","hentry","category-signal-jammer-information"],"yoast_head":"\nDesigners use different materials to design jammers: Designers use a variety of materials to create jammers - JAMMERSIGNAL<\/title>\n<meta name=\"description\" content=\"This article focuses on EMI mitigation methods and sources of electromagnetic interference (EMI) for product designers. EMC is the ability of a device, apparatus, or system to operate in its intended environment without causing significant electromagnetic disturbances to other equipment.\" \/>\n<meta name=\"robots\" content=\"index, follow, max-snippet:-1, max-image-preview:large, max-video-preview:-1\" \/>\n<link rel=\"canonical\" href=\"https:\/\/www.jammersignal.com\/de\/use-different-materials-to-design-jammers\/\" \/>\n<meta property=\"og:locale\" content=\"de_DE\" \/>\n<meta property=\"og:type\" content=\"article\" \/>\n<meta property=\"og:title\" content=\"Designers use different materials to design jammers: Designers use a variety of materials to create jammers - JAMMERSIGNAL\" \/>\n<meta property=\"og:description\" content=\"This article focuses on EMI mitigation methods and sources of electromagnetic interference (EMI) for product designers. EMC is the ability of a device, apparatus, or system to operate in its intended environment without causing significant electromagnetic disturbances to other equipment.\" \/>\n<meta property=\"og:url\" content=\"https:\/\/www.jammersignal.com\/de\/use-different-materials-to-design-jammers\/\" \/>\n<meta property=\"og:site_name\" content=\"JAMMERSIGNAL\" \/>\n<meta property=\"article:published_time\" content=\"2024-06-09T02:13:00+00:00\" \/>\n<meta property=\"article:modified_time\" content=\"2024-06-04T09:00:42+00:00\" \/>\n<meta property=\"og:image\" content=\"https:\/\/www.jammersignal.com\/wp-content\/uploads\/2024\/05\/5-band-portable-jammersignal-gsm-jammers-1.jpg\" \/>\n\t<meta property=\"og:image:width\" content=\"300\" \/>\n\t<meta property=\"og:image:height\" content=\"300\" \/>\n\t<meta property=\"og:image:type\" content=\"image\/jpeg\" \/>\n<meta name=\"author\" content=\"Tom\" \/>\n<meta name=\"twitter:card\" content=\"summary_large_image\" \/>\n<meta name=\"twitter:label1\" content=\"Verfasst von\" \/>\n\t<meta name=\"twitter:data1\" content=\"Tom\" \/>\n\t<meta name=\"twitter:label2\" content=\"Gesch\u00e4tzte Lesezeit\" \/>\n\t<meta name=\"twitter:data2\" content=\"3\u00a0Minuten\" \/>\n<script type=\"application\/ld+json\" class=\"yoast-schema-graph\">{\"@context\":\"https:\/\/schema.org\",\"@graph\":[{\"@type\":\"Article\",\"@id\":\"https:\/\/www.jammersignal.com\/use-different-materials-to-design-jammers\/#article\",\"isPartOf\":{\"@id\":\"https:\/\/www.jammersignal.com\/use-different-materials-to-design-jammers\/\"},\"author\":{\"name\":\"Tom\",\"@id\":\"https:\/\/www.jammersignal.com\/#\/schema\/person\/151f6dc0f4c288dbb8f8d70bee8e9202\"},\"headline\":\"Designers use different materials to design jammers\",\"datePublished\":\"2024-06-09T02:13:00+00:00\",\"dateModified\":\"2024-06-04T09:00:42+00:00\",\"mainEntityOfPage\":{\"@id\":\"https:\/\/www.jammersignal.com\/use-different-materials-to-design-jammers\/\"},\"wordCount\":354,\"commentCount\":0,\"publisher\":{\"@id\":\"https:\/\/www.jammersignal.com\/#organization\"},\"image\":{\"@id\":\"https:\/\/www.jammersignal.com\/use-different-materials-to-design-jammers\/#primaryimage\"},\"thumbnailUrl\":\"https:\/\/www.jammersignal.com\/wp-content\/uploads\/2024\/05\/5-band-portable-jammersignal-gsm-jammers-1.jpg\",\"articleSection\":[\"Signal Jammer Information\"],\"inLanguage\":\"de\",\"potentialAction\":[{\"@type\":\"CommentAction\",\"name\":\"Comment\",\"target\":[\"https:\/\/www.jammersignal.com\/use-different-materials-to-design-jammers\/#respond\"]}]},{\"@type\":\"WebPage\",\"@id\":\"https:\/\/www.jammersignal.com\/use-different-materials-to-design-jammers\/\",\"url\":\"https:\/\/www.jammersignal.com\/use-different-materials-to-design-jammers\/\",\"name\":\"Designers use different materials to design jammers: Designers use a variety of materials to create jammers - JAMMERSIGNAL\",\"isPartOf\":{\"@id\":\"https:\/\/www.jammersignal.com\/#website\"},\"primaryImageOfPage\":{\"@id\":\"https:\/\/www.jammersignal.com\/use-different-materials-to-design-jammers\/#primaryimage\"},\"image\":{\"@id\":\"https:\/\/www.jammersignal.com\/use-different-materials-to-design-jammers\/#primaryimage\"},\"thumbnailUrl\":\"https:\/\/www.jammersignal.com\/wp-content\/uploads\/2024\/05\/5-band-portable-jammersignal-gsm-jammers-1.jpg\",\"datePublished\":\"2024-06-09T02:13:00+00:00\",\"dateModified\":\"2024-06-04T09:00:42+00:00\",\"description\":\"This article focuses on EMI mitigation methods and sources of electromagnetic interference (EMI) for product designers. EMC is the ability of a device, apparatus, or system to operate in its intended environment without causing significant electromagnetic disturbances to other equipment.\",\"breadcrumb\":{\"@id\":\"https:\/\/www.jammersignal.com\/use-different-materials-to-design-jammers\/#breadcrumb\"},\"inLanguage\":\"de\",\"potentialAction\":[{\"@type\":\"ReadAction\",\"target\":[\"https:\/\/www.jammersignal.com\/use-different-materials-to-design-jammers\/\"]}]},{\"@type\":\"ImageObject\",\"inLanguage\":\"de\",\"@id\":\"https:\/\/www.jammersignal.com\/use-different-materials-to-design-jammers\/#primaryimage\",\"url\":\"https:\/\/www.jammersignal.com\/wp-content\/uploads\/2024\/05\/5-band-portable-jammersignal-gsm-jammers-1.jpg\",\"contentUrl\":\"https:\/\/www.jammersignal.com\/wp-content\/uploads\/2024\/05\/5-band-portable-jammersignal-gsm-jammers-1.jpg\",\"width\":300,\"height\":300,\"caption\":\"5 band portable jammersignal gsm jammers (1)\"},{\"@type\":\"BreadcrumbList\",\"@id\":\"https:\/\/www.jammersignal.com\/use-different-materials-to-design-jammers\/#breadcrumb\",\"itemListElement\":[{\"@type\":\"ListItem\",\"position\":1,\"name\":\"Home\",\"item\":\"https:\/\/www.jammersignal.com\/\"},{\"@type\":\"ListItem\",\"position\":2,\"name\":\"Signal Jammer Information\",\"item\":\"https:\/\/www.jammersignal.com\/category\/signal-jammer-information\/\"},{\"@type\":\"ListItem\",\"position\":3,\"name\":\"Designers use different materials to design jammers\"}]},{\"@type\":\"WebSite\",\"@id\":\"https:\/\/www.jammersignal.com\/#website\",\"url\":\"https:\/\/www.jammersignal.com\/\",\"name\":\"JAMMERSIGNAL\",\"description\":\"\",\"publisher\":{\"@id\":\"https:\/\/www.jammersignal.com\/#organization\"},\"potentialAction\":[{\"@type\":\"SearchAction\",\"target\":{\"@type\":\"EntryPoint\",\"urlTemplate\":\"https:\/\/www.jammersignal.com\/?s={search_term_string}\"},\"query-input\":{\"@type\":\"PropertyValueSpecification\",\"valueRequired\":true,\"valueName\":\"search_term_string\"}}],\"inLanguage\":\"de\"},{\"@type\":\"Organization\",\"@id\":\"https:\/\/www.jammersignal.com\/#organization\",\"name\":\"JAMMERSIGNAL\",\"url\":\"https:\/\/www.jammersignal.com\/\",\"logo\":{\"@type\":\"ImageObject\",\"inLanguage\":\"de\",\"@id\":\"https:\/\/www.jammersignal.com\/#\/schema\/logo\/image\/\",\"url\":\"https:\/\/www.jammersignal.com\/wp-content\/uploads\/2024\/05\/cropped-jammersignal-logo-4.png\",\"contentUrl\":\"https:\/\/www.jammersignal.com\/wp-content\/uploads\/2024\/05\/cropped-jammersignal-logo-4.png\",\"width\":104,\"height\":34,\"caption\":\"JAMMERSIGNAL\"},\"image\":{\"@id\":\"https:\/\/www.jammersignal.com\/#\/schema\/logo\/image\/\"}},{\"@type\":\"Person\",\"@id\":\"https:\/\/www.jammersignal.com\/#\/schema\/person\/151f6dc0f4c288dbb8f8d70bee8e9202\",\"name\":\"Tom\",\"image\":{\"@type\":\"ImageObject\",\"inLanguage\":\"de\",\"@id\":\"https:\/\/www.jammersignal.com\/#\/schema\/person\/image\/\",\"url\":\"https:\/\/www.jammersignal.com\/wp-content\/uploads\/2024\/05\/high-power-16-band-jammersignal-frequency-phone-adjuestable-jammers-1-100x100.jpg\",\"contentUrl\":\"https:\/\/www.jammersignal.com\/wp-content\/uploads\/2024\/05\/high-power-16-band-jammersignal-frequency-phone-adjuestable-jammers-1-100x100.jpg\",\"caption\":\"Tom\"},\"description\":\"Tom is an expert in the field of signal jammers. He has been engaged in jammer manufacturing for more than ten years and has extensive knowledge of jammers.\",\"sameAs\":[\"https:\/\/www.jammersignal.com\/\"],\"url\":\"https:\/\/www.jammersignal.com\/de\/author\/infojammersignal-com\/\"}]}<\/script>\n<!-- \/ Yoast SEO plugin. -->","yoast_head_json":{"title":"Designer verwenden verschiedene Materialien, um St\u00f6rsender zu entwerfen: Designer verwenden eine Vielzahl von Materialien, um St\u00f6rsender zu entwerfen - JAMMERSIGNAL","description":"Dieser Artikel befasst sich mit EMI-Minderungsmethoden und Quellen f\u00fcr elektromagnetische St\u00f6rungen (EMI) f\u00fcr Produktentwickler. Unter EMV versteht man die F\u00e4higkeit eines Ger\u00e4ts, einer Anlage oder eines Systems, in der vorgesehenen Umgebung zu funktionieren, ohne andere Ger\u00e4te erheblich elektromagnetisch zu st\u00f6ren.","robots":{"index":"index","follow":"follow","max-snippet":"max-snippet:-1","max-image-preview":"max-image-preview:large","max-video-preview":"max-video-preview:-1"},"canonical":"https:\/\/www.jammersignal.com\/de\/use-different-materials-to-design-jammers\/","og_locale":"de_DE","og_type":"article","og_title":"Designers use different materials to design jammers: Designers use a variety of materials to create jammers - JAMMERSIGNAL","og_description":"This article focuses on EMI mitigation methods and sources of electromagnetic interference (EMI) for product designers. EMC is the ability of a device, apparatus, or system to operate in its intended environment without causing significant electromagnetic disturbances to other equipment.","og_url":"https:\/\/www.jammersignal.com\/de\/use-different-materials-to-design-jammers\/","og_site_name":"JAMMERSIGNAL","article_published_time":"2024-06-09T02:13:00+00:00","article_modified_time":"2024-06-04T09:00:42+00:00","og_image":[{"width":300,"height":300,"url":"https:\/\/www.jammersignal.com\/wp-content\/uploads\/2024\/05\/5-band-portable-jammersignal-gsm-jammers-1.jpg","type":"image\/jpeg"}],"author":"Tom","twitter_card":"summary_large_image","twitter_misc":{"Verfasst von":"Tom","Gesch\u00e4tzte Lesezeit":"3\u00a0Minuten"},"schema":{"@context":"https:\/\/schema.org","@graph":[{"@type":"Article","@id":"https:\/\/www.jammersignal.com\/use-different-materials-to-design-jammers\/#article","isPartOf":{"@id":"https:\/\/www.jammersignal.com\/use-different-materials-to-design-jammers\/"},"author":{"name":"Tom","@id":"https:\/\/www.jammersignal.com\/#\/schema\/person\/151f6dc0f4c288dbb8f8d70bee8e9202"},"headline":"Designers use different materials to design jammers","datePublished":"2024-06-09T02:13:00+00:00","dateModified":"2024-06-04T09:00:42+00:00","mainEntityOfPage":{"@id":"https:\/\/www.jammersignal.com\/use-different-materials-to-design-jammers\/"},"wordCount":354,"commentCount":0,"publisher":{"@id":"https:\/\/www.jammersignal.com\/#organization"},"image":{"@id":"https:\/\/www.jammersignal.com\/use-different-materials-to-design-jammers\/#primaryimage"},"thumbnailUrl":"https:\/\/www.jammersignal.com\/wp-content\/uploads\/2024\/05\/5-band-portable-jammersignal-gsm-jammers-1.jpg","articleSection":["Signal Jammer Information"],"inLanguage":"de","potentialAction":[{"@type":"CommentAction","name":"Comment","target":["https:\/\/www.jammersignal.com\/use-different-materials-to-design-jammers\/#respond"]}]},{"@type":"WebPage","@id":"https:\/\/www.jammersignal.com\/use-different-materials-to-design-jammers\/","url":"https:\/\/www.jammersignal.com\/use-different-materials-to-design-jammers\/","name":"Designer verwenden verschiedene Materialien, um St\u00f6rsender zu entwerfen: Designer verwenden eine Vielzahl von Materialien, um St\u00f6rsender zu entwerfen - JAMMERSIGNAL","isPartOf":{"@id":"https:\/\/www.jammersignal.com\/#website"},"primaryImageOfPage":{"@id":"https:\/\/www.jammersignal.com\/use-different-materials-to-design-jammers\/#primaryimage"},"image":{"@id":"https:\/\/www.jammersignal.com\/use-different-materials-to-design-jammers\/#primaryimage"},"thumbnailUrl":"https:\/\/www.jammersignal.com\/wp-content\/uploads\/2024\/05\/5-band-portable-jammersignal-gsm-jammers-1.jpg","datePublished":"2024-06-09T02:13:00+00:00","dateModified":"2024-06-04T09:00:42+00:00","description":"Dieser Artikel befasst sich mit EMI-Minderungsmethoden und Quellen f\u00fcr elektromagnetische St\u00f6rungen (EMI) f\u00fcr Produktentwickler. Unter EMV versteht man die F\u00e4higkeit eines Ger\u00e4ts, einer Anlage oder eines Systems, in der vorgesehenen Umgebung zu funktionieren, ohne andere Ger\u00e4te erheblich elektromagnetisch zu st\u00f6ren.","breadcrumb":{"@id":"https:\/\/www.jammersignal.com\/use-different-materials-to-design-jammers\/#breadcrumb"},"inLanguage":"de","potentialAction":[{"@type":"ReadAction","target":["https:\/\/www.jammersignal.com\/use-different-materials-to-design-jammers\/"]}]},{"@type":"ImageObject","inLanguage":"de","@id":"https:\/\/www.jammersignal.com\/use-different-materials-to-design-jammers\/#primaryimage","url":"https:\/\/www.jammersignal.com\/wp-content\/uploads\/2024\/05\/5-band-portable-jammersignal-gsm-jammers-1.jpg","contentUrl":"https:\/\/www.jammersignal.com\/wp-content\/uploads\/2024\/05\/5-band-portable-jammersignal-gsm-jammers-1.jpg","width":300,"height":300,"caption":"5 band portable jammersignal gsm jammers (1)"},{"@type":"BreadcrumbList","@id":"https:\/\/www.jammersignal.com\/use-different-materials-to-design-jammers\/#breadcrumb","itemListElement":[{"@type":"ListItem","position":1,"name":"Home","item":"https:\/\/www.jammersignal.com\/"},{"@type":"ListItem","position":2,"name":"Signal Jammer Information","item":"https:\/\/www.jammersignal.com\/category\/signal-jammer-information\/"},{"@type":"ListItem","position":3,"name":"Designers use different materials to design jammers"}]},{"@type":"WebSite","@id":"https:\/\/www.jammersignal.com\/#website","url":"https:\/\/www.jammersignal.com\/","name":"JAMMERSIGNAL","description":"","publisher":{"@id":"https:\/\/www.jammersignal.com\/#organization"},"potentialAction":[{"@type":"SearchAction","target":{"@type":"EntryPoint","urlTemplate":"https:\/\/www.jammersignal.com\/?s={search_term_string}"},"query-input":{"@type":"PropertyValueSpecification","valueRequired":true,"valueName":"search_term_string"}}],"inLanguage":"de"},{"@type":"Organization","@id":"https:\/\/www.jammersignal.com\/#organization","name":"JAMMERSIGNAL","url":"https:\/\/www.jammersignal.com\/","logo":{"@type":"ImageObject","inLanguage":"de","@id":"https:\/\/www.jammersignal.com\/#\/schema\/logo\/image\/","url":"https:\/\/www.jammersignal.com\/wp-content\/uploads\/2024\/05\/cropped-jammersignal-logo-4.png","contentUrl":"https:\/\/www.jammersignal.com\/wp-content\/uploads\/2024\/05\/cropped-jammersignal-logo-4.png","width":104,"height":34,"caption":"JAMMERSIGNAL"},"image":{"@id":"https:\/\/www.jammersignal.com\/#\/schema\/logo\/image\/"}},{"@type":"Person","@id":"https:\/\/www.jammersignal.com\/#\/schema\/person\/151f6dc0f4c288dbb8f8d70bee8e9202","name":"Tom","image":{"@type":"ImageObject","inLanguage":"de","@id":"https:\/\/www.jammersignal.com\/#\/schema\/person\/image\/","url":"https:\/\/www.jammersignal.com\/wp-content\/uploads\/2024\/05\/high-power-16-band-jammersignal-frequency-phone-adjuestable-jammers-1-100x100.jpg","contentUrl":"https:\/\/www.jammersignal.com\/wp-content\/uploads\/2024\/05\/high-power-16-band-jammersignal-frequency-phone-adjuestable-jammers-1-100x100.jpg","caption":"Tom"},"description":"Tom ist ein Experte auf dem Gebiet der Signalst\u00f6rer. Er ist seit mehr als zehn Jahren in der Herstellung von St\u00f6rsendern t\u00e4tig und verf\u00fcgt \u00fcber umfassende Kenntnisse \u00fcber St\u00f6rsender.","sameAs":["https:\/\/www.jammersignal.com\/"],"url":"https:\/\/www.jammersignal.com\/de\/author\/infojammersignal-com\/"}]}},"_links":{"self":[{"href":"https:\/\/www.jammersignal.com\/de\/wp-json\/wp\/v2\/posts\/2607","targetHints":{"allow":["GET"]}}],"collection":[{"href":"https:\/\/www.jammersignal.com\/de\/wp-json\/wp\/v2\/posts"}],"about":[{"href":"https:\/\/www.jammersignal.com\/de\/wp-json\/wp\/v2\/types\/post"}],"author":[{"embeddable":true,"href":"https:\/\/www.jammersignal.com\/de\/wp-json\/wp\/v2\/users\/1"}],"replies":[{"embeddable":true,"href":"https:\/\/www.jammersignal.com\/de\/wp-json\/wp\/v2\/comments?post=2607"}],"version-history":[{"count":1,"href":"https:\/\/www.jammersignal.com\/de\/wp-json\/wp\/v2\/posts\/2607\/revisions"}],"predecessor-version":[{"id":2628,"href":"https:\/\/www.jammersignal.com\/de\/wp-json\/wp\/v2\/posts\/2607\/revisions\/2628"}],"wp:featuredmedia":[{"embeddable":true,"href":"https:\/\/www.jammersignal.com\/de\/wp-json\/wp\/v2\/media\/1682"}],"wp:attachment":[{"href":"https:\/\/www.jammersignal.com\/de\/wp-json\/wp\/v2\/media?parent=2607"}],"wp:term":[{"taxonomy":"category","embeddable":true,"href":"https:\/\/www.jammersignal.com\/de\/wp-json\/wp\/v2\/categories?post=2607"},{"taxonomy":"post_tag","embeddable":true,"href":"https:\/\/www.jammersignal.com\/de\/wp-json\/wp\/v2\/tags?post=2607"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}