{"id":3220,"date":"2024-07-15T03:07:00","date_gmt":"2024-07-15T03:07:00","guid":{"rendered":"https:\/\/www.jammersignal.com\/?p=3220"},"modified":"2024-06-28T04:16:40","modified_gmt":"2024-06-28T04:16:40","slug":"vehicle-mounted-wireless-jammer-achieve-wireless-remote-control","status":"publish","type":"post","link":"https:\/\/www.jammersignal.com\/es\/vehicle-mounted-wireless-jammer-achieve-wireless-remote-control\/","title":{"rendered":"\u00bfPuede el inhibidor de se\u00f1ales inal\u00e1mbricas montado en un veh\u00edculo lograr el control remoto inal\u00e1mbrico a larga distancia?"},"content":{"rendered":"\n

Can the vehicle-mounted wireless signal jammer achieve long-distance wireless remote control?<\/h2>\n\n\n\n

When a high-power wireless signal jammer is modified and integrated into a vehicle, it becomes a special device that can be used as a carrier, quickly transported, deployed and used. Users familiar with the device know that the host of the wireless signal jammer is installed at the rear of the vehicle and the transmitting antenna is installed on the top of the vehicle. Usually, the control handle with a cable connection is located near the driver’s seat or the controller. Therefore, some customers have raised the question: Can the vehicle-mounted wireless signal jammer achieve long-distance wireless remote control?<\/p>\n\n\n\n

These customers asked whether the jamming device on the vehicle can be remotely controlled from a considerable distance without the operator always staying in the vehicle to operate, activate or configure the wireless WIFI jammer<\/a>. This interest stems from the fact that the controller of the device is connected to the host by a control line, and the length of the control line is limited. The operator’s desire is to be able to remotely control the vehicle-mounted jammer like a remote control away from the vehicle.<\/p>\n\n\n\n

\"4g<\/a><\/figure>\n\n\n\n

Unfortunately, the existing remote control methods currently in common use cannot currently meet customer requirements. The reason is simple: the current remote control methods rely on wireless communication to transmit control commands. Whether it is the sending end or the receiving end, data communication is carried out on a specific wireless frequency or frequency band. The most common frequencies or bands are 433MHz, 2.4G and 5.8G. Here lies the dilemma: what does our car wireless signal jammer do? Its purpose is to block wireless signals, including basic and commonly used frequencies and bands for remote control signal transmission. Best-selling Cell Phone Jammers<\/a> and GPS jammers<\/a> in Europe and America.<\/p>\n\n\n\n

\"4g<\/figure>\n\n\n\n

If we forcibly adopt wireless remote control technology as the control method of the car wireless signal jammer, the following consequences will occur: the operator will try to use the remote control at a considerable distance, and there will be no problem in remotely activating the device. However, once the jammer<\/a> starts working, the jamming signal it emits will immediately interfere with the frequency band of the remote control, resulting in the operator being unable to establish effective communication with the remote control receiver of the wireless signal jammer no matter how he uses the remote control, unable to achieve remote shutdown, and unable to configure or modify other functions or parameters of the jammer.<\/p>\n\n\n\n

<\/p>\n\n\n\n

Best Selling Signal Jammers<\/h5>\n\n\n