{"id":3600,"date":"2024-07-31T03:33:00","date_gmt":"2024-07-31T03:33:00","guid":{"rendered":"https:\/\/www.jammersignal.com\/?p=3600"},"modified":"2024-07-16T07:58:41","modified_gmt":"2024-07-16T07:58:41","slug":"phone-blocking-system-only-block-mobile-phone-signals","status":"publish","type":"post","link":"https:\/\/www.jammersignal.com\/nl\/phone-blocking-system-only-block-mobile-phone-signals\/","title":{"rendered":"Kan het gsm-signaalblokkeringssysteem alleen gsm-signalen blokkeren zonder WiFi-signalen te blokkeren?"},"content":{"rendered":"\n

The mobile phone signal shielding system, also known as the mobile phone shielding system, adopts the B\/S architecture and realizes remote centralized control and management through the TCP\/IP protocol. Each mobile phone signal shielding device has an independent IP address, similar to ordinary network equipment, and can be connected to the network through a network cable for networking.<\/p>\n\n\n\n

The mobile phone shielding system can realize functions such as point-to-point switching, full on and off, and free group switching.<\/p>\n\n\n\n

\"world<\/a><\/figure>\n\n\n\n

The system supports scheduling and timing control, and can set the specific time schedule for switching operations.<\/p>\n\n\n\n

The mobile phone shielding system also has functions such as fault query and fault alarm, which greatly reduces the time of daily inspection work. Popular cell phone jammers<\/a> and WIFI jammers<\/a> in Europe and America.<\/p>\n\n\n\n

In addition, the system can realize remote switching of any channel of the mobile phone signal shielding device, and can remotely adjust the transmission power of each channel.<\/p>\n\n\n\n

There are two ways to achieve that the mobile phone shielding system only shields mobile phone signals but not WiFi signals:<\/p>\n\n\n\n

    \n
  1. When assembling the mobile phone signal shielding device, you can choose a module without WiFi frequency band to avoid the transmission of WiFi frequency band signals and ensure that WiFi signals are not shielded.<\/li>\n\n\n\n
  2. If you find that the WiFi signal is blocked after installing and using the mobile phone shielding system and need to connect a WiFi device, you can use the system to adjust the transmission power of the WiFi module to the minimum or directly turn off the output of the WiFi module.<\/li>\n<\/ol>\n\n\n\n
    \"world<\/figure>\n\n\n\n

    In addition, the mobile phone signal shielding system can not only adjust the transmission power of the WiFi module to the minimum or turn off its output, but also adjust the transmission power of any frequency module of the shield to the minimum or even completely turn it off.<\/p>\n\n\n\n

    <\/p>\n\n\n\n

    Best Selling Signal Jammers<\/h5>\n\n\n