Technical Specifications
Output interface | Shield band of frequency | RF output power | Output power/channel |
Antenna 1 | 5.1/5.8GHZ | 27dBm | 2dBm/30KHz(min) |
Antenna 2 | 3.5GHz | 27dBm | 2dBm/30KHz(min) |
Antenna 3 | 2500-2700MHz | 30dBm | 2dBm/30KHz(min) |
Antenna 4 | 2300-2500MHZ | 30dBm | 2dBm/30KHz(min) |
Antenna 5 | 2000-2170MHz | 30dBm | 4dBm/30KHz(min) |
Antenna 6 | 1.5GHz | 30dBm | 4dBm/30KHz(min) |
Antenna 7 | 0.7GÂ MHz | 30dBm | 5dBm/30KHz(min) |
Antenna 8 | 847-965Â MHz | 30dBm | 5dBm/30KHz(min) |
Antenna 9 | 4700-4900Â MHz | 27dBm | 2dBm/30KHz(min) |
Antenna 10 | 1800-1920Â MHz | 30dBm | 2dBm/30KHz(min) |
Power: supply AC110~220-DC15V/3AÂ | |||
Power consumption:48W | Weight: 1.3Kg | Side(length ×wind ×high): 247×80×220 cm |
Product Informations
The 10-channel mobile phone signal jammer is an environmentally friendly device that can selectively block mobile phone signals without affecting nearby base stations.
This mobile phone signal jammer works on 10 channels and can effectively block various mobile phone signals within a range of 1-4 meters (depending on the base station signal strength), whether it is domestic or international mobile phones, ensuring complete disconnection.
Installation Notes:
1. Before installation, make sure the antenna is installed correctly according to the markings provided. Then, power on the device to prevent damage. Suitable for use in small shielded areas such as vehicles and offices.
2. The device is equipped with a rechargeable battery, which can be used for up to 2 hours on a single charge. Built-in battery protection functions, including constant current and constant voltage charging, overcurrent and overheating protection, charging status indication, charging current detection, etc. If the device is not used for a long time, it is recommended to perform maintenance charging every two weeks.
Instructions:
The device’s operating mode is controlled by the power supply.
1. Open the package and check if all accessories are included. Take out the main unit and remove the antenna protective cover. When installing the antenna, align the numbers on the antenna with the corresponding numbers on the main unit and tighten them.
2. Confirm that the antenna is installed correctly, and then turn on the power. Observe that each green indicator light on the main unit lights up.
3. For first time use, it is recommended to charge for 10-12 hours. During the charging process, observe the charging indicator light. When the charging indicator light goes out, the charging process is complete.
Reviews
There are no reviews yet.