Many organizations tend to overlook the importance of regular system inspection and maintenance after installing wireless network shielding equipment. Over time, small problems will accumulate and lead to big problems, resulting in poor system performance. To ensure stability, organizations that install wireless network shielding equipment should develop a comprehensive inspection and maintenance plan. Based on years of field experience, here are some practical and easy-to-implement suggestions:
1.Check for jammer hardware failures
Check and resolve hardware failures in wireless network shielding equipment to prevent network and power outages.
2.Thoroughly check the jammer software settings
Thoroughly check the software settings to ensure that each IP parameter is unique and matches the actual installation location. Each jammer terminal in the wireless network jammer should have a unique IP address, and there should be no devices with overlapping IP addresses in the entire system.
3.Follow the jammer maintenance rules
Follow the specific maintenance sequence of wireless network shielding equipment:
- First, check if there are any IP setting errors and correct them.
- Use software to identify jammer terminals that cannot communicate in a specific area or building. Prioritize resolving network and power outage problems, as these problems are often related to line problems.
- Perform individual checks on scattered jammer terminals one by one.
4.Handle faults promptly
The effective operation of the entire wireless shielding system relies on uninterrupted power supply and seamless network communication for each device and node. It is recommended to overhaul the system and restore normal operation before assigning a dedicated person to regularly monitor and check each node. Once any node failure is found, it should be reported and repaired in a timely manner. It is critical to avoid the accumulation of unresolved problems. Cell phone signal jammer worth buying.
5.Clear regulations
It is clearly stipulated that no node or device terminal within the wireless shielding system shall be shut down or disconnected from the network without proper authorization.
6.Daily inspections
Assign a dedicated person to maintain a daily inspection and maintenance record ledger for wireless shielding equipment.
By implementing these recommendations and developing a systematic inspection and maintenance plan, organizations can ensure the optimal performance and life of their wireless shielding systems.
