What equipment is needed for the construction survey of the mobile phone signal shielding system project?
When agents and distributors undertake mobile phone signal shielding system projects or planning, they often need to conduct on-site surveys. If they lack similar project experience, they may seek guidance from manufacturers. The first question they usually ask is: What equipment is needed for the construction survey of the mobile phone signal shielding system project?
The early stage is the preparation work before the survey. The preparation work includes but is not limited to understanding the project requirements, determining the specific area of ​​the mobile phone signal blocker project, obtaining the building plan, structure diagram or room distribution map provided by the project party, etc. It is also beneficial to collect other information in advance, such as the location of nearby base stations and their distance from the project site.
Next, several equipment are needed for the construction survey of the mobile phone signal shielding system project. If the manufacturer can assist in the survey, the wireless signal frequency band analyzer will become a necessary tool for signal detection and analysis. In addition, it is also beneficial to have a professional engineering mobile phone and detection tools. If these options are not available, the minimum requirement for the detection equipment is to have multiple standard smartphones with pre-installed signal detection software. A commonly used mobile phone signal detection software is “Cellular-Z”. The data collected and recorded by the mobile phone signal detection software on site can provide useful insights for the design of the mobile phone signal shielding system project.
When surveying the site of the mobile phone signal shielding system project, in addition to the necessary test equipment or mobile phone software, it is best to have at least one or two cell phone signal jammers if conditions permit. This can be used to initially select test points during the survey. Relevant data can be recorded by starting the shielding equipment and checking the actual signal shielding range at these locations. These data serve as reference information for future mobile phone signal shielding system projects.
Finally, it is important to remember that when taking the mobile phone signal jammer to the site for actual measurement, it is recommended to prepare a power terminal board of sufficient length in advance. This ensures that the power cord of the shielding device is not too short when testing on site. Longer power cords avoid installation problems caused by insufficient height or unfavorable location, thereby maintaining a reliable reference value consistent with the actual shielding effect.
